The WCC bike on Kijiji with the 48cc is very unique looking, but a couple of things jump out at me... I wonder why there is no chain on the pedal sprocket? If you can't pedal it, its just an unlicenced motorcycle. It has been pedaled, because you can see where the left pedal side crank strikes the magneto cover. I cant see how the front motor mount is done, but since I don't see a clamp, I'm a bit nervous that 'it's owner' may have drilled through the frame's downtube (yikes!). I can't see brakes anywhere... of course if the pedal side chain will go back on you would have a rear coaster brake. The chain is rubbing on the fat rear tire... and the chain tensioner is a bit hinky, mounted sideways. One would have to have three hands to tighten the chain, not to mention the tensioner attempts to tighten the 'pull side' of the chain, rather than the slack side. Interesting intake manifold (copper pipe? w/ side mount carb), but the carb mounted almost horizontally would create some challenges for the float (at least!). It could probably be set upright easily enough, but the setup seems to point toward an inexperienced build and I think the carb would be right where your knee needs to be for pedaling.
Oh yeah - the straight pipe... sharp and loud. No doubt, done like this because of clearance issues with the unusual frame.
A build on this type of chopper frame would have posed some serious challeges, so my hat's off to the builder. Its not a project I would have attempted.
Still, overall a cool looking bike and the issues could be addressed by it's 'new owner'.
