« previous next »
Pages: [1]   Go Down

Author Topic: Dave Blagdon's CB400  (Read 3112 times)

0 Members and 1 Guest are viewing this topic.

Dennis

  • Club Member
  • *****
  • Posts: 1576
    • View Profile
Dave Blagdon's CB400
« on: January 20, 2016, 11:41:26 AM »
Former (and founding) Club member Dave Blagdon started with a parts bike, but then decided to build a rider.  He's in Chemainus now, and will be riding long before any of us.  He sent me a photo of the CB400.  Its looking pretty good.



Peace & Grease, Dennis
Logged

fast1

  • Guest
Re: Dave Blagdon's CB400
« Reply #1 on: January 20, 2016, 09:06:47 PM »
  Brock says his CB 350 4 is his favourite bike to ride. Wide open all the time and little fours are SMOOTH! Just ask Hans. CHEERS.
Logged

Rusty Bucket

  • Guest
Re: Dave Blagdon's CB400
« Reply #2 on: January 21, 2016, 08:30:05 PM »
 I ended up with a set of header pipes from a CB400F - if I remember, one of the pipes is dented - if anyone finds a need for these, they are welcome.  Might have a set of carbs too, but they are probably from a CB350/4 - oh, I was going to look in the carbs and see if the floats might be the same as the CB125 uses...
Logged

Matchlessaj

  • Guest
Re: Dave Blagdon's CB400
« Reply #3 on: February 15, 2016, 06:51:42 PM »
Hi,  I plan on getting my CB400f on the road early March, its a little rainy yet.  I have another CB400f  to build. The header would come in handy if only one dent compared to  one I have!  Found a complete OEM ignition right  here in Chemainus on the weekend so all should be good. Cheers from the wet coast.  Dave
Logged
Pages: [1]   Go Up
« previous next »