Prince George Vintage Motorcycle Club

Technical Section => Electrical => Topic started by: Dennis on July 15, 2010, 04:12:38 PM

Title: New plug wires for old coils
Post by: Dennis on July 15, 2010, 04:12:38 PM

Rusty, Paul and I were discussing the other night about how to put new plug wires on old coils where the wire is molded into the coil housing.  I had read an article on this. Here is the link
http://www.xs11.com/forum/showthread.php?s=0152c5ed8c5557527d305c4e7aa82683&threadid=137

Title: Re: New plug wires for old coils
Post by: fj1200 on July 15, 2010, 07:04:12 PM

Good information to file away. Thanks.

Title: Re: New plug wires for old coils
Post by: fast1 on November 18, 2011, 06:48:30 PM

  NGK makes a splicer you screw on to an existing  chunk of wire yhen screw your new wire on the other side. Available at Chieftan. Bit bulky and still leaves some of the old wire but it works.