Prince George Vintage Motorcycle Club

Technical Section => Complete Rebuilds => Topic started by: supdve on April 03, 2010, 06:41:48 AM

Title: CR480R
Post by: supdve on April 03, 2010, 06:41:48 AM

(http://i255.photobucket.com/albums/hh130/supdve/cr.jpg)

Title: Re: CR480R
Post by: supdve on April 03, 2010, 06:42:37 AM

(http://i255.photobucket.com/albums/hh130/supdve/cr4.jpg)

Title: Re: CR480R
Post by: supdve on April 03, 2010, 06:43:32 AM

(http://i255.photobucket.com/albums/hh130/supdve/seat.jpg)

Title: Re: CR480R
Post by: supdve on April 03, 2010, 06:44:15 AM

(http://i255.photobucket.com/albums/hh130/supdve/480.jpg)

Title: Re: CR480R
Post by: supdve on April 03, 2010, 06:44:45 AM

(http://i255.photobucket.com/albums/hh130/supdve/R.jpg)

Title: Re: CR480R
Post by: supdve on April 03, 2010, 06:53:29 AM

This is the motor that was at tech night at Rhett Coles shop.Had to bore it and new piston.frame was not usable in my opinionbut cut a deal with Kurt for his 83 250. I'm building as an 82 cuz its much cooler lookin  8).So far have purchsed tank, seat+ new cover,side covers,fenders,pipe,silencer off ebay.

Title: Re: CR480R
Post by: supdve on April 25, 2010, 06:54:17 PM

Fitting 1982 tank,seat,side panels on an 83 frame.

[attachment deleted by admin due to full attachment storage]

Title: Re: CR480R
Post by: supdve on April 25, 2010, 06:56:02 PM

The drivers side :)

[attachment deleted by admin due to full attachment storage]

Title: Re: CR480R
Post by: Rusty Bucket on April 25, 2010, 07:46:22 PM

Good goin' on the heart transplant, Dave: if it was me I would have been expecting all sorts of problems from exactly-engineered-to-fit racebike parts, and yet it looks totally factory.  Nice job making something from two nothings.

Title: Re: CR480R
Post by: supdve on April 26, 2010, 11:51:36 AM

Thanks Russ. With the seat on you can't see the tape holding the side panels on( they are bolted on now) and the pipe needs some mounts built yet.Needs tires,rear brake drum as this ones broke.I think I've got all the electrical components needed.

Title: Re: CR480R
Post by: madmac74 on April 26, 2010, 12:07:43 PM

 the "Widow Maker" Lives !!!!   ;D ;D
MAC

Title: Re: CR480R
Post by: supdve on April 26, 2010, 05:50:17 PM

No pulse yet but this ones breathing fire again.Likes to pull the front wheel up in 4th gear  :o and its not completly tuned yet.(http://i255.photobucket.com/albums/hh130/supdve/oct020.jpg)

Title: Re: CR480R
Post by: kaziff on April 27, 2010, 01:49:15 PM

Awesome job Dave, will we see it at Pine center? Kaziff

Title: Re: CR480R
Post by: ironpan65 on April 27, 2010, 06:13:54 PM

Ya Stuntman...How about bringing the "OLD" Husky to the PINE  ;D

Title: Re: CR480R
Post by: supdve on April 28, 2010, 08:50:46 PM

How bout the old Maico?(http://i255.photobucket.com/albums/hh130/supdve/spider.jpg)

Title: Re: CR480R
Post by: ironpan65 on April 28, 2010, 08:58:18 PM

Maico is a Good choice....Gonna Ride it to the Mall? :D


.(http://i618.photobucket.com/albums/tt270/Motoman69/img007.jpg)

Title: Re: CR480R
Post by: supdve on April 29, 2010, 04:17:39 PM

(http://i255.photobucket.com/albums/hh130/supdve/husky-laeuft.jpg)

Title: Re: CR480R
Post by: supdve on April 29, 2010, 04:18:50 PM

(http://i255.photobucket.com/albums/hh130/supdve/oldmnC3.jpg)           K back to the CR

Title: Re: CR480R
Post by: supdve on November 06, 2010, 07:43:58 AM

Haven't updated for a while :-\ so here's how the 480 sits now. still not running yet.  have to take the rear shock back out to be recharged or replaced, front fork leaking,needs new front tire and rim painted,front # plate,front brake cable,tank purdied up.

(http://i255.photobucket.com/albums/hh130/supdve/Iphone032.jpg)

Title: Re: CR480R
Post by: supdve on November 06, 2010, 07:54:58 AM

(http://i255.photobucket.com/albums/hh130/supdve/Iphone033.jpg)

Title: Re: CR480R
Post by: supdve on December 26, 2010, 05:52:42 PM

 Finally  got it started today after pouring gas down the spark plug hole.                  

http://www.youtube.com/watch?v=wxhfPO_qM_U

http://s255.photobucket.com/albums/hh130/supdve/?action=view&current=015-3.mp4    

Title: Re: CR480R
Post by: Fritz on January 01, 2011, 11:32:46 AM

Looks Good...Did you get a hold of the Guy from the LAKE on the other parts bike...?

Title: Re: CR480R
Post by: supdve on January 16, 2011, 05:14:30 PM

Yep I did so  now I have another motor and complete exhaust and misc other parts coming. Here's some updated pics of the CR,almost done. ;D

(http://i255.photobucket.com/albums/hh130/supdve/012-3.jpg)

Title: Re: CR480R
Post by: supdve on January 16, 2011, 05:15:15 PM

(http://i255.photobucket.com/albums/hh130/supdve/010-5.jpg)

Title: Re: CR480R
Post by: supdve on January 16, 2011, 05:16:19 PM

(http://i255.photobucket.com/albums/hh130/supdve/002-3.jpg)

Title: Re: CR480R
Post by: Fritz on January 17, 2011, 12:31:38 PM

Looks good there Stuntman.....The Tank turned out really nice and changed everything on that bike....Might have to try something like that on my BIG UGLY XT Tank........ 8)

Title: Re: CR480R
Post by: madmac74 on January 17, 2011, 02:47:01 PM

 Cool widowmaker !!!  ahh yes the left hand kick, my ankle still remembers ....... ;D ;D 8)

MAC