Prince George Vintage Motorcycle Club

PGMCC BUY & SELL => BIKES & PARTS WANTED => Topic started by: ironpan65 on October 09, 2009, 11:56:57 PM

Title: SHIMS
Post by: ironpan65 on October 09, 2009, 11:56:57 PM

Looking for some Kawasaki 29mm Shims....   2.60 or smaller
                     . ;D

I have some 29.5mm Suzuki shims - I could trade ?

imfritzed@hotmail.com

.

Title: Re: SHIMS
Post by: fj1200 on October 10, 2009, 11:13:41 AM

I Have  1-275,1-290, 1-280, 1-295, another 280 according to the finger-nail test and 1 less than 275 according to the same test. If they can be of any help.

Title: Re: SHIMS
Post by: ironpan65 on October 10, 2009, 06:31:48 PM

Thanks for the help fj ;D......need to find some thinner than 260 though right now.....probably end up ordering some this week
Unless Fast1 has some at his shop.....

Title: Re: SHIMS
Post by: fj1200 on October 11, 2009, 09:47:31 AM

Saw this on Ebay last night.  item# 400075399145 valve shims, his handle is "labstud". E-mailed him and he said that they are 29mm shims . You may want to check it out, there is a whole bunch for 80$.

Oh yeah sounds like madmac74 may have some he may not be using for awhile.

Title: Re: SHIMS
Post by: madmac74 on October 13, 2009, 07:13:42 AM

  Umm ,I don't think the shims are the same for a 900CC. My 650\750 shims are " shim under bucket" and are smaller then a dime in Diameter .... I think the ones you need are , bigger ,Like a loonie. if thats not the case and they are the smaller ones, I may have some on my 750 head I was gonna swap in .  good luck,

P   :)

Title: Re: SHIMS
Post by: ironpan65 on October 14, 2009, 10:18:23 AM

Found Some.... 8)........Thanks Fast1 and the PGMotorcycle Shop 8)