Prince George Vintage Motorcycle Club
Technical Section => Complete Rebuilds => Topic started by: Olafskii on April 13, 2020, 08:04:35 PM
-
Easter Weekend, 2020
All parts on the 'J' are now fixed, fiddled, polished and repaired. Now the re-assembly begins. The first step was to schlep all the parts upstairs and put them in the Garage (now that the snow is finally starting to melt). My wife not only bakes good cookies, but is willing to help carry the occasional engine up some stairs. The engine was carried in a cradle. The photos tell the rest.
(https://i.imgur.com/MWIe6RR.jpg)
(https://i.imgur.com/ACMmGx0.jpg)
(https://i.imgur.com/7B8fBzZ.jpg)
I used some foam packing (that was packed around new kitchen fan that we bought last year) as dunnage to pad the engine when I laid it on its side.
(https://i.imgur.com/N4ZuoBK.jpg)
(https://i.imgur.com/8MQZuLi.jpg)
I mounted the engine-frame on an 'ATV lift' that i bought on sale a few years back but have never used. (Zip tied the frame to the lift) so now i can roll the assembly around.
(https://i.imgur.com/eXq2wWR.jpg)
(https://i.imgur.com/WKSGwmD.jpg)
Tires leak checked and balanced (each needed 1/4 ounce).
(https://i.imgur.com/8l42NyG.jpg)
-
Looking good.
-
Nice. Remember the engine oil......
-
Nice. Remember the engine oil......
As in remember its full before you add another 3.5 litres.
-
Nice. Remember the engine oil......
As in remember its full before you add another 3.5 litres.
Never can tell with those 2 strokes....
-
Electrics mounted
Swing arm and shocks mounted
(https://i.imgur.com/66Mlqe6.jpg)
-
Up date?
-
Wheels, shocks forks mounted. Carburettors float levels checked, installed, connected and adjusted.
(https://i.imgur.com/xwwi58i.jpg)
(https://i.imgur.com/We7HfFF.jpg)