Prince George Vintage Motorcycle Club
Technical Section => Brakes => Topic started by: Dennis on August 20, 2018, 12:42:23 PM
-
After about 10 months of my last XS650 purchase sitting neglected in my driveway, I decided I needed to move it some where that did not make my home look so trashy. However, the rear wheel was seized and I could not roll it. I tore into the project this weekend.
(https://i.imgur.com/I1KM6uf.jpg)
It turns out the brake shoe material was seized to the drum.
(https://i.imgur.com/gxKmvcL.jpg)
I had to make a special chisel to carve it out.
Once removed, I was able to re-assemble the wheel on the bike and park/hide it in my back yard.
Peace & Grease, Dennis