Prince George Vintage Motorcycle Club

General Category => General Discussion => Topic started by: Donovan on March 25, 2018, 05:55:07 PM

Title: wheel balancer
Post by: Donovan on March 25, 2018, 05:55:07 PM

Thanks to Rick he brought over a new shaft for Neil's wheel balancer.  When some asked what 375 was I said 3/8".  But on comparing the two shafts the original is larger.  So I measured it and it came out at 15/32" or .48".  It probably is metric and that works out to 12mm.  So it might work out with the smaller shaft and that is something we will have to find out.  Cheers