Prince George Vintage Motorcycle Club

General Category => General Discussion => Topic started by: Dennis on January 20, 2016, 11:41:26 AM

Title: Dave Blagdon's CB400
Post by: Dennis on January 20, 2016, 11:41:26 AM

Former (and founding) Club member Dave Blagdon started with a parts bike, but then decided to build a rider.  He's in Chemainus now, and will be riding long before any of us.  He sent me a photo of the CB400.  Its looking pretty good.

(http://i1219.photobucket.com/albums/dd433/smith5304/Daves%20CB400_zpsorumaogj.jpg) (http://s1219.photobucket.com/user/smith5304/media/Daves%20CB400_zpsorumaogj.jpg.html)

Peace & Grease, Dennis

Title: Re: Dave Blagdon's CB400
Post by: fast1 on January 20, 2016, 09:06:47 PM

  Brock says his CB 350 4 is his favourite bike to ride. Wide open all the time and little fours are SMOOTH! Just ask Hans. CHEERS.

Title: Re: Dave Blagdon's CB400
Post by: Rusty Bucket on January 21, 2016, 08:30:05 PM

 I ended up with a set of header pipes from a CB400F - if I remember, one of the pipes is dented - if anyone finds a need for these, they are welcome.  Might have a set of carbs too, but they are probably from a CB350/4 - oh, I was going to look in the carbs and see if the floats might be the same as the CB125 uses...

Title: Re: Dave Blagdon's CB400
Post by: Matchlessaj on February 15, 2016, 06:51:42 PM

Hi,  I plan on getting my CB400f on the road early March, its a little rainy yet.  I have another CB400f  to build. The header would come in handy if only one dent compared to  one I have!  Found a complete OEM ignition right  here in Chemainus on the weekend so all should be good. Cheers from the wet coast.  Dave